Home > Automotive Metal Stamping
Trans-Matic automotive metal stamping and deep drawn metal stampings for the automotive industry. We utilize precision metal stamping capabilities to produce custom deep drawn metal stampings to serve the automotive industry in braking, oxygen sensor, fuel delivery, air bag, bayonet socket, and sensor markets.
| Quality Policy |
Trans-Matic is committed to providing our customers with precision automotive metal stamping that exceeds their expectations. We strive to continually improve the effectiveness and efficiency of our quality management system. We are committed to following our policies, procedures, and our customers’ specifications to achieve business performance improvements and to create the highest quality precision metal stampings for the automotive industry. We achieve our quality policy commitments through setting and attaining our Quality Objectives by monitoring parts per million calculations, scrap, sorting costs, and customer concerns to avoid negative trends in quality, continually striving to acheive 100% on-time delivery, and monitoring cost to maintain profitability. Trans-Matic's precision metal stamping products are certified ISO/TS 16949.
The raw materials used at Trans-Matic in our automotive metal stampings include low carbon cold rolled 
steels (1006 to 1050), pre-coated steels, stainless steels (300 & 400 series), Inconnel, brass, bronze, copper, and aluminum (1100, 3003, & 5052).
Trans-Matic has perfected the ability to engineer both coarse and fine threading automotive metal stampings, wall ironing, multiple side piercing, knurling, embossing, rectangular shapes, coining and marking, extruding and many other required precision deep drawn metal stamping part features in our transfer presses. These precision metal stamping capabilities for the automotive industry eliminate the need for costly secondary operations.
Following the development and production of a precision metal stamping or custom deep drawn metal stampings component, Trans-Matic has the ability to perform numerous value added options for our automotive metal stamping customers. Our precision metal stampings for automotive application include threading (rolled or cut), crimping, boring, welding, and fully automated assembly work cells. Trans-Matic automotive metal stampings utilize our lean logistic stream to leverage our local supplier partnerships to support us with the following part finishing options: aqueous parts cleaning, ultrasonic part cleaning, passivation, vibratory deburring, part on part tumbling, machining, zinc and phosphate plating (including HEX free), E coating, black oxide, autophoretic, copper plating, annealing and heat treating.
| Environmental Policy |
In addition to producing high quality precision deep drawn metal stampings for the automotive industry, Trans-Matic is also committed to protecting the environment by striving to continually improve our automotive metal stamping processes to minimize waste and pollution, while striving to comply with all relevant environmental regulations and other requirements. Trans-Matic is certified ISO 14001 automotive metal stamping manufacturer.
Trans-Matic's large press metal stampings capability begins with several Waterbury Farrel presses in the 105 ton (95 tonne) to 300 ton (272 tonne) size. Our die set transfer press capabilities begin with 400 ton (363 tonne) Aida and Minster presses and go up to 600 tons (544 tonne). Trans-Matic's large eyelet press and die set transfer press technology provides the precision automotive metal stamping capabilities to an overall length of 7” (177mm) and to accommodate raw material thickness up to .150” (3.81mm).
Trans-Matic automotive metal stamping company uses small eyelet and ICOP press technology that provides the capability to draw components with a raw material thickness starting at .005” (0.127mm). Trans-Matic precision metal stampings small press capabilities include Waterbury Farrel, US Baird, and Platarg presses starting at 5 tons (4.5 tonne) increasing to 75 tons (68 tonne). We have duplicate automotive metal stamping manufacturing capabilities at each of our production centers.
Transmatic Automotive Metal Stampings:
- Using cold rolled steels (1006 to 1050), pre-coated steels, stainless steels (300 & 400 series), Inconnel, brass, bronze, copper, and aluminum (1100, 3003, & 5052).
- With overall length up to seven inches.
- With thickness ranging from .005" (0.127mm) to .150" (3.81mm).
- With in-press capability to produce automotive metal stampings with both coarse and fine threading, wall ironing, multiple side piercing, knurling, embossing, rectangular shapes, coining and marking, extruding and many other required features.
- Automotive metal stamping for automotive applications includes braking, oxygen sensor, fuel delivery, air bag, bayonet socket, and sensor markets.
- Precision metal stamping serves non-automotive markets such as lock hardware, compressor, appliance, fire prevention, pharmaceutical, HVAC, and plumbing.
- Automotive metal stamping in compliance with quality standards ISO/TS 16949.
- Automotive metal stamping in compliance with environmental standards TS 14001.
For more information on our automotive metal stamping company call our headquarters in Holland, Michigan at: 616.820.2500 or Contact Us