Transmatic - Metal Stampings Manufacturer, Custom Metal Stampings

In addition to producing high quality deep drawn metal stampings, Trans-Matic is also committed to protecting the environment by striving to continually improve our processes to minimize waste and pollution, while striving to comply with all relevant environmental regulations and other requirements. Trans-Matic is certified ISO 14001 metal stampings manufacturer.

Metal Stamping Company Trans-Matic's large press metal stamping capability begins with several Waterbury Farrel presses in the 105 ton (95 tonne) to 300 ton (272 tonne) size. Our die set transfer press capabilities begin with 400 ton (363 tonne) Aida and Minster presses and go up to 600 tons (544 tonne). Trans-Matic's large eyelet press and die set transfer press technology provides the custom deep drawn metal stampings capabilities to an overall length of 7” (177mm) and to accommodate raw material thickness up to .150” (3.81mm).

Trans-Matic custom metal stamping company uses small eyelet and ICOP press technology that provides the capability to draw components with a raw material thickness starting at .005” (0.127mm). Trans-Matic small press metal stampings capabilities include Waterbury Farrel, US Baird, and Platarg presses starting at 5 tons (4.5 tonne) increasing to 75 tons (68 tonne). We have duplicate custom metal stamping manufacturing capabilities at each of our production centers.

For more information on our metal stamping company call our headquarters in Holland, Michigan at: 616.820.2500 or Contact Us

Transmatic produces deep drawn metal stampings:

Using cold rolled steels (1006 to 1050), pre-coated steels, stainless steels (300 & 400 series), Inconnel, brass, bronze, copper, and aluminum (1100, 3003, & 5052).
With overall length up to seven inches.
With thickness ranging from .005" (0.127mm) to .150" (3.81mm).
With in-press capability to produce deep drawn metal stampings with both coarse and fine threading, wall ironing, multiple side piercing, knurling, embossing, rectangular shapes, coining and marking, extruding and many other required features.
Deep drawn metal stampings serve automotive markets including braking, oxygen sensor, fuel delivery, air bag, bayonet socket, and sensor markets.
Deep drawn metal stampings to serve non-automotive markets such as lock hardware, compressor, appliance, fire prevention, pharmaceutical, HVAC, and plumbing.
In compliance with quality standards ISO/TS 16949
In compliance with environmental standards TS 14001

Trans-Matic a leading metal stamping company is committed to providing our customers with custom metal stampings that are world class and exceed their expectations. We strive to continually improve the effectiveness and efficiency of our quality management system. We are committed to following our policies, procedures, and our customers’ specifications to achieve business performance improvements and to create the highest quality deep drawn metal stampings. Our metal stamping company achieves our quality policy commitments through setting and attaining our Quality Objectives by monitoring parts per million calculations, scrap, sorting costs, and customer concerns to avoid negative trends in quality, continually striving to achieve 100% on-time delivery, and monitoring cost to maintain profitability. Trans-Matic's custom metal stamping and precision deep drawn metal stamping products are certified ISO/TS 16949.

Transmatic Metal Stamping Companty The raw materials used at Trans-Matic in our custom metal stampings include low carbon cold rolled steels (1006 to 1050), pre-coated steels, stainless steels (300 & 400 series), Inconnel, brass, bronze, copper, and aluminum (1100, 3003, & 5052).

Our metal stamping company has perfected the ability to engineer both coarse and fine threading, wall ironing, multiple side piercing, knurling, embossing, rectangular shapes, coining and marking, extruding and many other required precision deep drawn metal stampings part features in our transfer presses. These metal stamping manufacturing capabilities eliminate the need for costly secondary operations.

Following the development and production of a custom deep drawn metal stampings component, Trans-Matic has the ability to perform numerous value added options for our customers. Our metal stamping options include threading (rolled or cut), crimping, boring, welding, and fully automated assembly work cells. Our metal stamping company utilizes our lean logistic stream to leverage our local supplier partnerships to support us with the following metal parts finishing options: aqueous parts cleaning, ultrasonic part cleaning, passivation, vibratory deburring, part on part tumbling, machining, zinc and phosphate plating (including HEX free), E coating, black oxide, autophoretic, copper plating, annealing and heat treating.

Home > Metal Stamping Company

Trans-Matic metal stamping company and precision deep drawn metal stampings are world class. Our metal stamping company produces custom metal stampings and precision deep drawn metal stamping to serve the automotive industry in braking, oxygen sensor, fuel delivery, air bag, bayonet socket, and sensor markets. Our non-automotive metal stamping company serve the lock hardware, compressor, appliance, fire prevention, pharmaceutical, HVAC, and plumbing markets.